Introduction
Not only a professional cyclist but any Bicycle rider must do a rapid inspection to prevent troubles from arising and avoid little-ignored situations from becoming dangerous and costly breakdowns.
We have put together 4 tests that we advised you to complete before every Bicycle Ride.
1) Wheelset
Think bicycle and you envision two huge wheels. The wheels make up the bulk of this vehicle. You don’t want anything untowardly and abruptly occurring to the wheels, such as becoming loose or worse falling off.
2)bicycle ride Tires
To enjoy your ride and prevent a puncture check that the air pressure in the bicycle tires is enough. Tires lose air over time and you need to fill up as necessary to obtain a general notion push down on the top of the wheel. To acquire exact readings utilize an air gauge to find out whether the pressure is as per the specified range. Bicycle Ride If not use a bicycle tire pump to get the necessary pressure.
Another tire check that is advised is a visual assessment of each tire for any foreign items like sharp stones or nails that may be stuck and entrenched in the thread that might be a possible source of punctures. In case you discover any, aggressively pry them out before you start riding.
3) Brakes
critical, indeed extremely critical, ensure that both brakes are operating correctly. You don’t want to be stuck in traffic and suddenly learn that the brakes are not functioning. Do a brake check in two stages. One, push both brakes together and confirm that the levers are functional.
There should be a smooth movement of the levers towards the handlebar with only a one or two-finger gap in between. Next, check on the working of each of the brakes. Press the left-hand brake lever and try moving the bicycle forward and backward. The brakes should stay firm without sliding. Do the same with the right-hand brake.
4) Bicycle Chain
Here again, check out for two things, the working and whether there is appropriate lubrication. Spin the pedals to test that the chain powers the back wheel.
And if it is a geared bike check sure the gear lever and the derailleurs operate to change the chain between the ratios. Also, verify that the chain is clean and appropriately oiled so that it can move easily.
Doing these four inspections before every ride can limit the likelihood of having a breakdown or an issue pop up while you are on your route.
